Trijicon HD SPOTTING SCOPE, Инструкция по эксплуатации

Страница: 10 / 14

16 17
Detaching Eyepiece
Trijicon HD
™
Spotting Scope features a removable
eyepiece with a Release Lever which allows the use
of variable magnification eyepiece options.
1. Locate the eyepiece Release Lever located at
the rear of the scope.
2. Pull down and hold the eyepiece Release Lever
while rotating the eyepiece counter-clockwise
until it stops.
3. Carefully lift eyepiece straight out to remove.
4. Clean dust out of eyepiece socket and mating
eyepiece with a dust free cloth.
PREPARATION FOR USE PREPARATION FOR USE
Attaching Eyepiece
To attach an eyepiece onto the Trijicon HD
™
Spotting Scope:
1. Line up the white Alignment Dot on the body
of the scope with the white Alignment Dot on
the side of the eyepiece.
2. Once dots are aligned, and eyepiece is flush
with the body, rotate clockwise until the Release
Lever clicks. Pull the eyepiece up gently to verify
the eyepiece is locked.
Note: The Trijicon HD
™
Spotting Scope can only accept
Trijicon eyepieces.
FIGURE 10
Alignment
Dots
FIGURE 9
Release
Lever
Eyepiece