Trigon Recall II, Руководство по эксплуатации

Страница: 8 / 16

[ 5 ] Operational status indicator LED
After switching on the CD Player this LED flashes for a few seconds, until the RECALL
RECALL RECALL
RECALL II
II II
II
stabilized its internal operating voltages. As soon as the LED is constantly, the CD Player
is ready for use.
[ 6 ] Key OPEN
The CD drawer can be opened and closed by pressing this key. Every time you press this
key, the OPEN-LED light briefly shines more brightly.
[ 7 ] Key < < < (title return and fast search return)
This key has two functions. The scanning laser jumps to the title beginning of the
momentary shown title by briefly pressing the key. The laser will be brought to the previous
title by pressing the key two times. Long pressing of the key arranges the return search
where the signal can be listened to sequentially.
The LED over the key shines more brightly, as long as the key is pressed.
[ 8 ] Key > > > (title jump forward and fast search advance)
This key has two functions. The scanning laser jumps to the next title by briefly pressing
the key. The advance search will be started by holding down the key, where the signal can
be listened to sequentially.
The LED over the key shines more brightly, as long as the key is pressed.
[ 9 ] Key START
If there is an audio-CD in the
RECALL II
, the CD player can be started by pressing
this key. Now the START-LED shines more brightly. By pressing the START-Button during
the rendering procedure the Break-Function is switched on. Now the START-LED flashes.
Pressing again on the start button solves the break, the starting LED shines again
constantly and the device is again in the run mode.
[ 10 ] Key STOP
If you want to break off the rendering procedure, you can do that by depressing the key
STOP. The LED STOP will shine more brightly.
[ 11 ] Key MODE
The four different time modes can be selected with this key. For further information see
number [ 4 ].
[ 12 ] Power switch
The
RECALL II
can be switched on and/or off with this switch. The mains voltage is
directly powered, i.e., the
RECALL II
doesn’t use any electricity when switched off.