5.3 Color
In this menu you can adapt the color scheme of the display to your requirements.
Use the navigation buttons to select the desired setting (green dot). Now press the button
[
4
] on the device or button (
8
) on the remote control to switch to
Setting to arrive. The dot now lights up red. You can now set the parameters using the
navigation buttons. After setting, complete the setting by pressing button [
4
] on the device
or button (
8
) on the remote control. To exit the Color submenu, press the button [
1
] on the
device or button (
4
) on the remote control.
5.4 IR-Remote
In order to control the
EXXCEED
CD player with an infrared remote control, a total of
16 different remote control commands are required. Often you have a remote control from
a device from another manufacturer that is no longer used in the drawer that you would
like to continue using. To make this possible, the
EXXCEED
CD player can "learn"
remote control commands from external remote controls.
Open the IR Remote menu as described above. Here you can see a list of the 16 keys of
the original TRIGON DIRECTOR PREMIUM remote control. The numbers of the buttons in
Figure-4 correspond to the numbers in this submenu.
If you e.g. If you want to use the “PAUSE” function (key no. 10) with another remote
control, navigate to position 10 in this submenu and press the START key [
4
] on the
EXXCEED
CD player. The control LED now lights up red. Now press the button on the
external remote control that should have the "" break "function. The control LED now
changes from red to green as soon as the
EXXCEED
CD player has recognized the
new remote control command.
The control LED lights up green for all programmed commands.
If you now want to delete a command, navigate to the desired position and hold down the
[
4
] START button until the control LED goes out. The position can now be re-programmed
as described above.
13
