TX56/56A and TX57/57A Installation Manual
5 April 2022
01776-00-01
Issue AD
______________________
Trig Avionics
Page 17
Screw, Pozidriv, pan head, M2.5 x 8mm, pre patch
(cable grips and rear panel)
6
01024-00
Screw, Philips countersunk head, 4-40 UNC x
0.312", pre patch
(attach D connectors and shells
to connector mounting plate)
4
01397-00
Washer, M2.5 Rectangular Section, Spring
6
01473-00
User Label Sheet
1
01653-00
USB Flash Drive
1
02011-00
4.6 Required Items
Additional items you will require, but which are not in the TX56/TX57
package, include:
VHF Com antenna and fixing hardware. The TX56 or TX57 are
compatible with any standard 50 ohm vertically polarised antenna
with a VSWR better than 2.5:1.
VHF Nav antenna and fixing hardware. The TX56 or TX57 are
compatible with any standard 50 ohm horizontally polarised
broadband antenna.
Cables. You need to supply and fabricate all required cables.
Guidance on cable types is given in section 5.
Fixings. To secure the Nav/Com tray to the airframe you will need at
least 6 flat head screws and self-locking nuts. If the aircraft does not
have existing mounting provisions you may need to fabricate
additional brackets to support the Nav/Com tray.
Existing wiring provisions from a previously installed radio may be re-used
provided they are in satisfactory condition.
Содержание TX56
Страница 2: ...This page intentionally left blank ...