Caution!
Fans are very strong! To avoid possible injury and contaminated
filament, use the Airpath indoors on a
CLEAN, DRY, FLAT SURFACE
.
The fans will pick up dust, paper, and debris from under and around the
Airpath and blow them up into the air.
●
Fans will turn ON by default when the machine is plugged in.
●
Do not use this device if any parts appear missing or damaged.
●
Do not modify this device without authorization from Triex LLC.
●
Using this device for anything other than cooling filament as specified
in the operation section has not been approved for safety or applicability
by Filabot.
●
Use of a DC power supply other than the one provided may result in
damage to the Airpath or poor operation.
●
General Specifications
Power AC/DC Adaptor Input:
100-240VAC 50/60Hz 1.0-0.5A
DC Power/Adaptor Output:
24VDC 5A
Dimensions:
24in L x 3 1/8in H x 7 1/8in W
Weight:
9 pounds (4kg)
Contact Filabot with any questions
