Trieste TRV602IX, Инструкция по использованию и установке

Страница: 7 / 12

7
INSTALLATION
TECHNICAL INSTRUCTIONS
FOR THE INSTALLER
Installation, transformations and maintenances
below listed, may only be carried out by a
competent technician.
The appliance must be correctly installed in
conformity with current law and the
manufacturer's instructions.
A wrong installation may provoke damages to
persons, animals or things, for which the builder
can not be responsible.
3) INSERTING THE CERAMIC COOKTOP
After having cleared out all the packing
components, make sure of the integrity of the
appliance.
Please keep children away from all packing
elements ( carton, polystyrene, nails...).
Make a cutout in the worktop, according to the
dimensions indicated in fig. 5; make sure that will be
respected the critical dimensions of the space in
which the appliance has to be installed (fig. 6).
4) FIXING THE CERAMIC COOKTOP
A special sealing strip underneath the hob for damage.
Make sure it is correctly positioned with no gaps; it
avoids any water infiltration. To fix in the right way
the strip, please, respect the following instructions:
- fix the hooks in the relative accomodations of the body
(fig. 7).
- Overturn the hob, take the seal strips off from
their support, having care that the transparent
protection remains attached to the seal. Correctly
place the seal “E” (fig. 8) under the hob edge, so
that the external side of the seal fits together with
the external perimentrical edge of the hob. The
ends of the strip must fit together without
overlapping.
- Stick the seal to the hotplate uniformly, pressing
it with fingers.
- Take the protective paper strip of the seal off,
place the hotplate in the opening made in the
table top, and lock it with the special screws “F”
(fig. 9).
- In order to avoid accidental touch with the
overheating bottom of the hob, during the
working, is necessary to put a wooden insert,
fixed by screws, at a minimum distance of 60
mm from the top (see fig. 5).
WARNINGS:
be aware that the glue that join the laminated
plastic to the furniture, has to resist to
temperature not below 150 °C, to avoid the
unstuck of the panelling.
The rear wall, adjacent and surrounding surfaces
must therefore be able to withstand an
overtemperature of 65 K.
COMPLY WITH THE
DIMENSIONS (mm)
FIG. 7 FIG. 8 FIG. 9
FIG. 5 FIG. 6
A B C D E
2E 282 482 59 59 100 min.
CAUTION:
do not place the glass directly on the unit.
The bottom of the hob must rest on the unit.