10
For normally soiled loads,
such as pots, plates,glasses
and lightly soiled pans.
standard daily cycle.
A shorter wash for lightly
soiled loads that do not
need drying.
Normal
Rapid
Pre-wash
Pre-wash
Wash（50℃）
Rinse（65℃）
Drying
Wash（45℃）
Rinse（45℃）
5/25 g
20 g
120
30
12
0.9
0.45
For the heaviest soiled loads,
such as pots,pans,casserole
dishes and dishes that have
been sitting with dried food
on them for a while.
Pre-wash（50℃）
Pre-wash
Wash（65℃）
Rinse
Rinse
Rinse（55℃）
Drying
1.4
22
5/25g
16
130
For normally soiled loads,
such as
, plates,glasses
and lightly soiled pans.
standard daily cycle.
pots
Pre-wash
P
Wash50℃
Rinse70
Drying
re-wash
℃
3in1
160
1.2
17
(AS/NZS 2007. 1 )
If some of the program lights begin to glimmer, that indicates the machine is out of order, please
turn off the main power and water supply before calling a service(see the section entitled "Error codes").
A forgotten dish can be added at any time before the detergent cup opens.
Open the door a little to stop the washing.
After the spray arms stop working, you can open
the door completely.
Load the forgotten dishes.
Close the door, the dishwasher will start running again
after 10 seconds.
4
3
2
1
NOTE:
It is dangerous to open the door when washing, because the hot water may scald you.
Starting a wash cycle
1 . Draw out the lower and upper basket, load the dishes and push them back. It is commended that loading the lower basket
first, than the upper one (see the section entitled Loading the Dishwasher.)
2. Pour in the detergent (see the section entitled Detergent and Rinse Aid)
3. Insert the plug into the socket. The power supply is 220-240VAC 50 HZ, the specification of the socket is 10 A 250 VAC.
4. Make sure that the water supply is turned on to full pressure.
5. Open the door, press the Power button, then press the your desired program. (Seethe section entitled."Wash Cycle Table".)
6. With a little force to ensure the door is properly closed.
NOTE: A click could be heard when the door is closed perfectly.
7. When the working cycle has finished , turn off the power and water supply.
Premise: A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent
dispenser must be refilled (see the section entitled " Loading the Detergent " ).
Open the door , Press the prog. Button more than three seconds to cancel the program , then you can change the
program to the desired cycle setting (see the section entitled " Starting a wash cycle. . . " ). Then , close the door.
NOTE: If you open the door while washing, the machine will pause, when you close the door, it will keep on working after 10 seconds.
When the working cycle has finished, the buzzer of the dishwasher will sound for 8 seconds, then stop. Turn off
the appliance using the ON/OFF button, shut off the water supply and open the door of the dishwasher.
Wait for a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they
are still hot and more susceptible to breakage. They will also dry better.
Содержание TRD-IWQP12-9348E
Страница 2: ...TRD IWQP12 9348E ...
