www.tridonic.com
4
Subject to change without notice. Information provided without guarantee.
Data sheet 04/21-CO137-1
Lighting Controls and Connectivity
DALI-2 components
6 – 7 mm
wire preparation:
1 – 4 mm²
3.5 Wiring type and cross section
The wiring can be solid wire or stranded wire with end sleeve with a
cross-section of 1 to 4 mm².
3.6 Note for Application Controller
Device is developed according DALI Standard EN 62386-208 and
is DALI device Type 7, control gear – Switching function.
4. Miscellaneous
4.2 Additional information
Additional technical information at www.tridonic.com
→
Technical Data
Lifetime declarations are informative and represent no warranty claim.
No warranty if device was opened.
4.1 Disposal of equipment
Return old devices in accordance with the WEEE directive to suitable
recycling facilities.
3.3 Connection diagrams
DALI RM
CDM 30
10A 1CH
L
N
Load
Lout
Lin
10 A
MSensor G3
DALI
PS
L
N
LED Driver
LED Driver
DALI-2 Application Controller
DALI
RM
CDM
DA
DA
T4
T3
T2
T1
COM
DA
DA
3.4 Installation
Mount the DALI relay on DIN rail inside a mains rated enclosure as shown in
fig. 1.
To remove from DIN rail, release the clip mechanism with a flat blade screw
driver, as per fig. 2.
Fig. 1
Fig. 2
