Trident A-Range, Руководство пользователя

Страница: 11 / 16

Phase Invert
The Phase button inverts the phase when
pressed (as seen in the picture).
Saturation
The Saturation or distortion of the A-Range is
placed after the equalizer bands and is
depending on the gain settings of the bands.
A louder or “hotter” signal will make the unit
distort more and a weaker signal will make it
distort less.
To be able to handle signals of different volumes and to make up for equalizer band
settings we added a
Saturation knob that basically is a volume compensated input gain
for the saturation circuits. The LED next to the saturation knob indicates when the signal is
being distorted. If you want to be sure not to add any saturation to the sound, click the
“OFF” label and the saturation circuit will be bypassed.
You will get the best result if the saturation is used sparingly on percussive
sounds, like a drum bus. Let it take care of occasional peaks, and do not run
it too hot.
Output Volume
The Output knob controls the output volume from the plug-in. The range of the output
volume is -30 dB to 10 dB.
11
The Phase switch, Saturation knob and
indicator LED and the Output Volume.