Trident 88 Скачать руководство пользователя страница 7

Страница: 7 / 40

Trident 88

Owners Manual

Trident 88

Input Channel Mic/Line Options

Mic Gain

This control adjusts the amount

of gain of the signal connected

to the MIC XLR / 1/4” combination

connector. For low impedance

balanced microphones plugged

into the XLR, the gain varies

from +5dB minimum to approx-

imately +60dB. For a line level

device plugged into the 1/4”

part of the MIC combination

connector, the gain varies from

-15dB to +40dB,

eff

ectively pro-

viding a 20dB pad to the micro-

phone preamp.

Note: This gain is independent

from the Line gain.

Line Gain

This control adjusts the amount

of gain of the signal connected

to the TRS LINE Jack.

MIC INSERT

Selects between the Mic input source

on the XLR / 1/4” combination

connector and the line level in-

put (labeled Ext MIC) that feeds

the channel. This allows the user

to connect a line source (exter-

nal mic preamp) and be able to

bypass the channel Mic preamp

stage or switch between them.

+48V

When depressed, provides +48

volt phantom power to the XLR

portion of the MIC input con-

nector. Note: +48V will NOT ap-

pear on the 1/4” part of the MIC

input connector. Phantom pow-

er is required for operation of

many condenser microphones.

See your microphone instruc-

tions to see if phantom power

is required or is to be defeated

(some - though few – micro-

phones require phantom pow-

er NOT to be activated or they

may be damaged).

I/P Rev

The Input Reverse switch when

depressed flips the Line Input

signal and the Monitor Input

signals. In

eff

ect this switch de-

termines the Line Input source

that is available to the channel.

Combining this with the Line

switch above allows the user to

source the channel signal from

the channel Monitor Return TRS

jack and to use the full channel

strip resources for the Monitor

Return signal. Alternatively de-

pressing this switch selects the

Line Input TRS source for the

channel Monitor section.

Line Switch

When depressed, it switches source

from Line Input to Mic Input.

POL

When depressed, reverses the

electrical input polarity of any

microphone or line level input

signal selected as the channel

source. Use of this control may

alter the sound quality of a input

relative to other channels when

multiple microphones are pick-

ing up the same sound.

CHAN MTR

This button selects the signal that is

fed to the relevant channel meter sit-

uated on the meter bridge. In the up

position the channel Direct Output

feed is displayed.

[The channel Direct Output can be

user defined by a selectable option on

the Input module, it can be selected

either channel post fader or channel

Insert Return (signal appearing on ring

contact of channel INSERT TRS jack.]

When this button is depressed the

channel meter is fed from the signal on

the channel MONITOR I/P TRS jack.

In a multi-track studio environment

where the channel Direct Output is

fed to the recording device and the

output of this device is connected to

the MONITOR input, it is possible to

see on the channel meter what is sent

to or received from the recording de-

Trident 88

Input Channel Group Assignment

Содержание 88









































Результаты поиска

Содержание 88

Отзывы:

Похожие инструкции для 88

Бренды по названию

Популярные бренды

Trident 88, Руководство пользователя

Результаты поиска

Содержание 88

Отзывы:

Похожие инструкции для 88

Бренды по названию

Популярные бренды