Trident 78, Руководство пользователя, Страница: 16 / 28

Trident 78
Owners Manual
15
Trident 78 The Master Module MONITOR SECTION
L/R MONITOR
Xformer IN
Inserts a transformer path into the
Left/Right Monitor outputs. The
transformer is an optional add on
and does not get installed by default.
Note: If the transformer is not fitted,
then this switch will not do anything
and will not illuminate.
L/R INSERT ON
When depressed, this switch places
the rear panel Left and Right insert
paths to the Insert Sends and back
from the Insert Returns in line with the
signal path. This insert point is directly
after the Left/Right mix stage and be-
fore the Left/Right stereo Fader and
allows the user to connect an external
device in series with the Left/Right sig-
nal and to be able to switch it in/out
from the front panel.
SOLO ACTIVE LED
When this LED is illuminated, it indi-
cates that one or more SOLO switch-
es have been pressed on the console.
The console monitor output is now
being fed from the solo left/right mix
buses. Additionally the console main
Left/Right meters are switched to
monitor the solo left/right mix and
an additional meter bridge indicator
flashes to show the console is in a
“SOLO” state.
STEREO IN JACK
(3.5mm, 1/8”)
This jack allows the engineer to plug
in an external stereo signal via a
standard 1/8” wire cable ( i.e IPOD)
which can then be selected to the
main Control Room Monitors. To as-
sign this signal into the main mon-
itors, the user has to depress the
2-TRK 1 switch.
2-TRK 2
When depressed this selects the sig-
nal from the stereo 2-TRK 2 Return
pins of the DSUB (on the rear mas-
ter connector panel) to the control
room monitors. This switch has pri-
ority over 2-TRK 1 switch above. (see
description 2 TRK 1)
SUM MONO
Combines the Left and Right sig-
nals feeding the control room mon-
itors to produce and summed (L+R)
mono signal that feeds both Left and
Right monitor outputs. Note: The
SUM MONO facility is purely a moni-
tor function and does NOT affect the
main stereo Left/Right output which
remains as a true stereo image.
SOLO MASTER LEVEL
CONTROL
This control adjusts the level of the solo
left/right mix fed to the control room
monitors when one or more SOLO
switches are selected on the console.
This presets the SOLO signal level and
enables the engineer to balance the
signal levels to the control room mon-
itors from the main mix and the solo
mix. Note: Main Left Right meters al-
ways show the solo signal pre this level
control (unaffected by this control).
2-TRK 1
When depressed this selects either the
signal from the stereo 2-TRK 1 Return
pins of the DSUB (on the rear master
connector panel) or the stereo sig-
nal plugged in the STEREO IN JACK
(above) and feeds it to the control
room monitors. The stereo 2-TRK 1 re-
turn signal from the rear connector is
normalled to the STEREO IN JACK sig-
nal and if a signal wire is plugged into
the STEREO IN JACK it replaces the
signal from the 2-TRK 1 Return from the
rear panel and that is the signal that is
switched to the main monitors. Note:
When this switch is depressed, the
main Left/Right mix is disconnected
from the control room monitors, also
if 2-TRK 2 switch is depressed (below)
this kills the 2-TRK 1 signal to the con-
trol room monitors. For monitoring sig-
nals into control room monitors the Pri-
ority is SOLO mix Ú 2-TRK 2 Ú 2-TRK
1
Ú
Main Left/Right mix.