37
3.4
DOS Utilities
The Utility Installation program is used to install and retrieve instructions
on:
a)
Utility programs
b)
Non-Windows applications display drivers.
Run the Utility Installation Program by executing the following steps:
þ
1.
INSERT the Drivers and Utilities Disk #2 in the floppy drive.
þ
2.
TYPE in “README” at the DOS prompt.
þ
3.
A numbered list of available destination drives will be
displayed on the screen. SELECT the destination drive by
TYPING in the corresponding number; e.g., to select drive C,
type in “1” (see Figure 3-25).
Figure 3-25.
