Repeat step 3 on the opposite side.
Items required:
C x 4
5
Ensure all rungs are securely inserted into
leg recesses and that flat head screws (C)
are screwed tightly and tight to the legs.
Tightening the screws requires significant
strength.
6
7
Open the Triclimb frame and stand it up.
The frame may rock slightly, which is
normal. Place your hands at the top of the A
frame and press down firmly. This will help
to square up the frame. You may need to
rock the frame back and forth a few times
while applying downward pressure on the
frame to ensure the ends of all four legs sit
flat on the floor and that the unit does not
rock when the pressure is released.
What to do if your Triclimb still does not sit flat on the ground?
You will need a book (or something similar) about 40mm thick to act at a raiser.
CHECK POINT
1) Open the Triclimb frame and insert the thumb screws.
2) Place the book or similar under one of the two opposing legs that are
flat to the ground.
3) Push down on the top joints. You may hear a creaking sound - do not be
alarmed, this is just the moving into correct alignment.
4) Remove the book or similar (if rocking remains repeat adding further
height to the raiser until the frame aligns).
5) You should now have a correctly aligned frame.
If there is still a slight wobble, simply increase the size of the raiser and
repeat step 2 and 3.
