www.tricklestar.com
AV Advanced Pow
Setup Instructions
Step 2
Step 1
< tv >
< tv >
Plug devices that require continuous
power and devices with hard disk
drives into the always-on outlets
(e.g., DVR and set-top box).
TAV-Link (optional):
Peripheral electronics that are
capable of receiving CEC commands
should be plugged into the always-on
outlets (see step 5).
always on
surge
ground
switched
switched
Plug the TV into the control outlet
marked <tv>.
Note: The TV must be plugged into
this outlet.
Remove the backing from the
double-sided tape on the top of the
multi-sensor. Affix the multi-sensor to
the TV, near the TV's remote sensor,
facing the TV-watching area.
Step 6
Step 5
TAV-LINK CAPABILITY
–OPTIONAL–
Plug the TAV-Link cable (sold
separately) into an open HDMI port
on your TV.
TAV-Link will softly switch off (or
place into an energy saving mode)
HDMI-connected peripherals
capable of receiving CEC
commands.
TAV-LINK CABLE SOLD SEPARATELY
Step 7
Plug the power strip into a
grounded outlet. The ground and
surge lights on the power strip will
illuminate, indicating that the power
strip is properly grounded and
surge protection is active.
Step 4
Plug the multi-sensor into the port
on the side of the power strip that
looks like a phone jack and marked
“sensor.”
Step 3
switched
dvd
cable box
game console
amplifier
< tv >
subwoofer
Plug TV peripherals, such as a DVD
player, speakers and or receiver into
the outlets labeled "switched." into
the switched outlets.
Note: All four switched outlets
operate the same way. The icons are
just examples of AV equipment that
can be plugged into these outlets.
always on
ground
surge
sensor
swiched
