Copyright© TrickleStar LLC 2016. All rights reserved.
TrickleStar
® is a registered trademark of TrickleStar Ltd. All other trademarks are the property of their respective owners. The information in this document is subject
to change without notice.TrickleStar assumes no responsibility for any errors that may appear in this document.
For customer support go to:
www.tricklestar.com/support or call 1-888-700-1098
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
REV 8 / 2 June 2016
Changing The Countdown Timer
The default setting for the countdown timer is 60-minutes. Based on your
preference, you can adjust the countdown timer.
To change the countdown timer, press and hold the button on the
multi-sensor for 10 seconds and release the button once the red LED
illuminates.
• Press the button:
- Once for 30 minutes
- Twice for 60 minutes
- Three times for 120 minutes
• The red LED will flash once to confirm 30 minutes, flash twice to
confirm 60 minutes, flash three times to confirm 120 minutes.
