Frequently Asked Questions
1. How do I know if my PowerStation1500 is charged?
To check the charge level of your PowerStation1500, refer to the Battery
Display. When lit upv, you’ll see a battery display with 5 segments. If the
battery is fully charged, the icon would stop flashing and all 5 segments will
be filled. You can use the PowerStation1500 even when it’s not fully charged.
2. Can my PowerStation1500 charge my electronic devices/appliances?
You need to check the power at each output port. For example, the power at
AC output port is provided by the built-in inverter of the product, whose
maximum continuous output power is 1000 W. This means that it is only
suitable for electronic device with a power requirement of less than 1000 W.
3. Can my PowerStation1500 charge and discharge simultaneously?
Yes, but it is not recommended to charge and discharge at the same time in
order to protect the battery life.
4. Can I charge my PowerStation1500 by using two solar panels in series?
Yes, just make sure the total open circuit voltage (VOC) of the solar panels
are less than 40 V, otherwise it may trigger the charging overvoltage
protection or cause damage.
5. Can I use two PowerStation1500 in parallel?
No.
6. Can I use the PowerStation1500 to power up my refrigerator or air conditioner?
Yes, but only for low power refrigerators or air conditioners, where the total
power is significantly lower than 1000 W. The starting power of refrigerators
and air conditioners are generally 5~7 times more than the rated power, which
easily triggers AC overload.
7. Can I use third party solar panels with my PowerStation1500?
Yes, you can use third party solar panel to power up the PowerStation1500.
Make sure the solar panel output range voltage is within 16 V to 60 V, and the
connector is compatible with our PowerStation1500's input charging port.
