601CC-US-W
www.tricklestar.com
Restore Factory Defaults
Press the Reset Button for 2 seconds to restore factory defaults.
Battery
The product contains a rechargeable battery to store settings if
power is removed.
If the battery level is low, a “LO” icon will flash in the display.
Connect the product to a power outlet for 1 hour to recharge the
battery. If the battery is fully discharged, the factory defaults will be
restored.
Electrical and Environmental Specifications
Voltage
125 VAC / 60Hz
Power Rating:
16A / 3680W – Resistive
Load
2A / 460W – Inductive Load
Humidity Control Range
10% - 90% N/C
Humidity Measuring Range
10% - 90% N/C
Measurement interval
10 sec.
Switching hysteresis
Up to 3 minutes
Operating Temperature
-10° to 40°C
Storage Temperature
-10ºC to 70ºC
Storage Humidity
5 to 95% N/C
IMPORTANT SAFETY NOTICES
•
Fans or other appliances with exposed elements should not
be left unattended.
•
FOR INDOOR USE ONLY
•
SUITABLE FOR NON-CONDENSING ENVIRONMENTS
ONLY.
Approvals
US ELECTRICAL & SAFETY
OTHER
ETL
2002/95/EG (RoHs)
2002/96/EC (WEEE)
1999/5/EC (RTTE)
Warranty
www.tricklestar.com/warranty
Copyright & Disclaimer
© TrickleStar Ltd. All rights reserved.
TrickleStar
TM
is a registered trademark of TrickleStar Ltd.
Disclaimer: TrickleStar reserves the right to change specifications
or designs described in this manual without notice and without
obligation. Any typographical, clerical or other error or omission in
this document or other documents or information issued by
TrickleStar shall be subject to correction without any liability on the
part of TrickleStar without notice.
Conserving Energy. Improving Life.
www.tricklestar.com
