Tricity Bendix TBU750, Руководство пользователя

Страница: 27 / 36

27
Hook clamp
under here
Cable
clamp
Connecting to the mains terminal
WARNING!
Warning: This appliance must be earthed.
•
We recommend you use a new length of
6mm
2
twin core and earthed cable to
ensure your safety.
•
Make connection as shown by proceeding
as follows:-
•
Preform wires to the appropriate shape to
suit fitting into the mains terminal block.
•
Strip inner insulation on wires using
wirestrippers.
•
Twist the bared wires using pliers.
•
Cut bared wires 10mm away from the end
of the inner insulation. Where uninsulated
Earth wires are used ensure they are
suitably sheathed to leave 10mm bare wire
to fit into the terminal.
•
Clamp bare wires into the relevant terminal
and check they are held by tugging each
one in turn.
•
Clamp the mains cable securely ensuring
5mm of the outer insulation is inside the
terminal block and that the wires are not
taut but not so slack as to cause any
fouling. See diagram.
•
Place fuse/miniature circuit breaker in
circuit and switch on at mains.
Checking electrical connections
Correct electrical connection can be confirmed
when switching on the appliance and setting the
grill.
Note: House circuit
Earth leakage and continuity tests must be
carried out before the appliance is connected to
the mains supply and re-checked after fitting.
Connecting to a hob or cooker point
•
Either follow in general terms the
instructions for connecting to the terminal
block or refer to the hob suppliers
installation instructions.
WARNING!
Feed the cable through the cabinet and
arrange to route the cable away from the
appliance which may become hot.
Fitting into the space between
cabinets
WARNING!
IMPORTANT: Ensure that the oven is
switched off at the wall before any further
work is carried out.
•
Position the appliance in front of the
cabinet.