background image

9

The upper basket 

The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 24 cm in
diameter), salad bowls, cups and glasses.

Larger plates (dinner plates up to 24 cm in diameter)
must be loaded in the front part of the upper basket.

Arrange items on and underneath the fold-down cup
rack so that water can reach all surfaces.

Glasses with long stems can be placed upside down
in the raised cup racks.

Light items (plastic bowls etc.) should be loaded in the
upper basket and arranged so they do not move.

Before closing the door, ensure that the 
spray arms can rotate freely.

When loading the dishes, ensure that you do
not cover the water inlet funnel in the middle 
of the upper basket.

Adjusting the height of the upper
basket 

If washing very large plates (over 27 cm and up to 31
cm in diameter) you can load them in the lower basket
after moving the upper basket to the higher position.

To move to the higher position proceed as follows:

1. Move the front runner stops (A) of the upper basket 

outward and slide the basket out.

2. Refit the basket in the higher position and replace 

the stops (A) in their original position.

When the top basket is in the higher 
position it will only take plates up to 20 cm 
in diameter and you will not be able to use 
the raised cup racks.

After loading your machine always close 
the door, as an open door can be a hazard.

CES14en

US20

US16

US16

A

RC01

Содержание CDW 087





























Отзывы: