Tribute IMALA, Руководство пользователя

Страница: 17 / 62

All vehicles have both a 12v and 230v
electrical system.
The 12v electrical system is supplied by a
rechargeable leisure battery that is located
in a dedicated battery compartment within
the vehicle (locations of leisure batteries
varies from model to model so please
familiarise yourself with your battery location
prior to using the vehicle for the first time).
The leisure battery is charged either by the
vehicle alternator when the engine is running,
or by the on board battery charger when the
vehicle is connected to a suitable mains supply
via the hook-up lead supplied with the vehicle.
Connection the mains supply also activates the
230v sockets and 230v lights (where fitted to
a vehicle), as well as various mains appliances.
All vehicles utilise a combined
power supply unit (PSU) that contains the
battery charger, 12v fuses, mains RCD
(residual circuit breaker) and MCB’s
(miniature circuit breakers).
Please familiarise yourself with the location of
the PSU unit prior to using the vehicle for the
first time (individual specifications of PSU
units will be described in more detail later
in this section).
Connecting The Vehicle To A
Mains Supply
Your vehicle is supplied with an orange mains
hook-up cable that will connect your
motorhome to a suitable power supply
on site via the mains hook-up point on
your motorhome.
Mains hook-up points vary from model to
model
so please familiarise yourself with your
particular location prior to using your
vehicle for the first time.
Your motorhome should only be connected to a
supply that meets the requirements of
BS7671.
The site warden will hold information regarding
the suitability of supply.
• Locate the charger power switch on the PSU
unit and switch to the ‘OFF’ position before
connecting the mains supply.
• Connect the supplied hook-up cable
(orange cable with blue connectors)
to the motorhome and then connect
to the mains supply.
• Check the RCD operation by ensuring
that the RCD is switched ‘ON’ (lever in
up position). Press the ‘TEST’ button
and confirm that the RCD is turned off
(lever in ‘DOWN’ position).
Electrical Services
Electrical Services