Tributaries T2-INT, Руководство пользователя

Страница: 3 / 18

Tributaries T2-INT is a two outlet power pack designed to provide clean, surge
suppressed AC power to your valuable home theater components. Its compact
size makes it ideal for placement behind flat panel displays and the included
mounting hardware makes installation quick and easy. Designed for universal
10amp / 240VAC environments, the T2 has IEC input and outputs to conform to
most wiring requirements. By using the latest technology, your equipment will
have a high level of protection from damaging spikes and overvoltage conditions
as well as providing a clean source of power that is free of signal degrading noise
and distortion.
Your Tributaries T2-INT Power Pack represents the latest in power management
and surge suppression technology. However, like any electronic devise, if
inappropriately or improperly installed it may not perform as intended. By
following a few common sense precautions, your T2 will give you many years of
worry-free performance
Read all the safety instructions prior to operating. •
To reduce the risk of fire or electric shock, do not expose this equipment to •
rain or moisture.
Provide proper ventilation, do not install near heat sources such as radiators,
•
heat registers, stoves or other appliances that produce heat.
Do not remove the cover.
•
No user-serviceable parts are inside the unit; please contact an authorized •
Tributaries dealer for information on service and repairs.
Grounding: your unit requires that a safety ground be present for proper
•
operation. Operating without a grounding prong is considered improper
operation.
Protect AC power cords from being walked on or pinched. Pay particular
•
attention to the condition of the cords at the point where they exit your unit.
To prevent injury, damaged cords should be replaced immediately.
2 surge suppressed outlets •
IEC connections for universal applications •
Mounting hardware for ease of installation •
1836 Joules of surge suppression •
Line Filtering of 58dB at 150KHz – 100Mhz for clean power •
Circuit breaker for overload protection •
Green LED light indicates surge suppression is working •
Red LED light indicates safe power •
T2-INT •
Mounting hardware •
Operation manual •
InTRoDUcTIon
2
safeTy
feaTURes
PacKaGe conTenTs
E
NG
l
IS
h