RS-232
HDMI IN 4
HDMI OUT
HDMI IN 3
HDMI IN 2
HDMI IN 1
DC 5V
Introduction
HX410 is a high performance HDMI switcher with 4 separate HDMI inputs and 1 output. It
provides for various HDMI sources to share one HDTV display. Simply press one button to
select your desired HDMI source for display on the HDTV.
Features
•
HDMI 1.3 and HDCP 1.1 compliant.
•
Supports 30/36/48 bit color depth display.
•
Supports High Definition audio – Dolby Digital True HD
®
and DTS-HD
®
.
•
Signal Enhancement feature allows you to improve signal quality for long cable lengths.
•
LED indicators.
•
Ideal for home theater integration and presentation.
•
Supports high resolution input:
PC:
VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200) and
1920 x 1200 &
HDTV:
480i, 576i, 480p, 576p, 720p, 1080i, and 1080p
•
Remote control.
•
Easy to install and simple to operate.
•
Supports RS232 operation.
Operational Controls and Functions
Remote control sensor.
Input select/Indicators: Press the "INPUT" button repeatedly to switch to your desired
input source. The LED will illuminate to indicate which input source is selected.
Signal Enhancement/Indicator: This feature is useful when encountering poor picture
quality. The possibilities include; a poor quality or too long an HDMI cable, or inconsistencies
in the connected electronics. If, after having connected the HX410 and experienced a poor
Operational Controls and Functions
HDMI output: HDMI output of the HX410 to the HDMI input of your display.
HDMI inputs: Connect your various HDMI sources to each of the HDMI inputs of
the HX410.
Power: Plug the supplied 5VDC power supply into the unit.
RS232: 9-pin D-sub female connector for connecting to a control console for
remote control. (Cable not included)
* The connection between HX410 and remote controller through RS-232 modem cable.
REAR PANEL
1
4
2
3
INPUT
1
2
3
4
SIGNAL ENHANCE
POWER
HX410
4x1 HDMI Switcher
FRONT PANEL
1
2
3
4
HDMI 1.3
1
2
3
1
2
3
4
HX410
CR-22
1
3
2
Hand-Held IR Remote Control
Power:
Press the button to turn on/off the unit.
Direct input selector: (1-4)
Press the appropriate number button to select
your desired input source.
Void buttons (5-0 – No function)
1
2
3
quality picture, for instance, flickering, noise (on-screen “sparkling”), a grainy image or no
image, the use of the SIGNAL ENHANCE may result in an improvement. To turn on this
feature simply press the “SIGNAL ENHANCE” button. The LED will illuminate when the
signal enhancement circuitry is activated. If no improvement is experienced, recheck all your
connections, recycle the power to the affected components and/ or replace components and
cables until the cause is determined. However, if an appropriate picture quality is displayed,
the use of the SIGNAL ENHANCE button will not produce a visible change.
Power/Indicator: The LED will illuminate when the power is connected.
4
