TRIBUS Wheelchair accessible minibus, Руководство пользователя

Страница: 9 / 17

AS-81-190807 14 of 27 13 of 27
USE OF THE PROTECTOR RESTRAINT SYSTEM
STEP 1
Retractors are removed from
the rail by pulling the ring
and sliding the retractor. As
the retractor is released, you
can lift it from the rail.
STEP 5
Use the red belt as a hip belt.
Attach the seat belt buckles
onto the belt latches of the
retractors.
STEP 4
Place the rear retractors (with
belt latch) for fixation of rear
and position the hooks onto
the frame of the wheelchair.
STEP 2
You can position retractors
by sliding them over the rail,
applying light pressure. For
an optimal result you hold
them as shown in the picture.
STEP 3
First position the front
retractors and secure the
hooks to the frame of the
wheelchair. Pressing the red
button will unlock the hook.
STEP 6
Set the size of the hip belt
and fasten it.
RELEASE THE FLEXUSPRO SEAT FROM RAILS
STEP 1
Unscrew the two black
tightening knobs counter
clockwise.
STEP 4
Slide the seat a bit backward,
to make the fittings being
unrestricted in the rails. Tilt
the seat backwards and take
it from the rails.
STEP 2
Then slightly lift the
tightening knobs and rotate
them a quarter turn counter
clockwise.
STEP 3
The T-pins are now on the
plunger. The seat is now
unrestricted in the rails.
PROTECTOR RESTRAINT SYSTEM
Mounting should be performed exclusively by trained personnel after
consultation of the user manual!
Mounting should be performed exclusively by trained personnel after
consultation of the user manual!
FLEXUSPRO RELEASING SEAT