Cutting angle threshold
Align offset threshold
Loss threshold
Compensation arc time
Fiber alignment mode
Fast splice mode
Forced splice mode
1.0
0.4um
0.10dB
1.0s
Core align
Off
Off
08:20
01.07.2017
80%
Enter
Back
Splice operate mode
Fiber type
Splice program No.
Edit splice program
Clean arc time
Surface angle threshold
SM
Manual Enter
SM-1
Enter
120ms
3.0
Splice Mode
Splice Mode
SM, MM, DS, NZDS...
Set fiber alignment limitation
Manual, Auto, Half-auto
Set fiber alignment offset threshold
S
et current splicing program number
Set splicing loss limit value
E
dit splicing parameters under current program No.
Set compensation arc time
Clean tiny dust on fiber end by a short arc discharging
Fine align, Cladding align, Core align
Set the limit value of fiber end surface angle
On or Off
On or Off
Splice Mode
8
Press / key to choose the line, and use / key to set the detailed configuration.
