TriBrer EPN70, Руководство пользователя, Страница: 12 / 22

11
When the cursor is on "ThNo:" you can change the
threshold number, (see figure 1)
Enter
When the cursor is on "FALT:""WRNG""FALT:" you can
shift the cursor from each bit of the data. (see figure 2)
Move the cursor up, please note the cursor is not in one
Move the cursor down, please note the cursor is not in one
bit of any data
bit of any data
Increase the bit by 1, when the cursor is in one bit of any
Decrease the bit by 1, when the cursor is in one bit of any
data (see figure 3)
data (see figure 3)
How to understand the threshold:
1.Each wavelength has its threshold.
2.If the current value > Max. Value, the alarm of corresponding
wavelength will be
FAIL .
3.If the current value < Max. Value, but > Warning Value, the
alarm of corresponding wavelength will be
PASS
4.If the current value < Warning Value, but > Min. Value, the
alarm of corresponding wavelength will be
WRNG
5.If the current value < Min. Value, the alarm of corresponding
wavelength will be
FAIL .
Threshold & Calibration