Tribesigns HOGA-F1138, Инструкция пользователя

Страница: 4 / 12

Instructions For Fastening
CAM-BOLT AND CAM-LOCK
Pane
l
Pane
l
Pane
l
Shoulder
Cam-bolt head needs to be in centre
Wron
g
Corre
ct
Correct Wrong
Shoulder is
above panel
Attach the Cam-bolt to the specific pre-drilled holes on the panel. Use a Phillips
Screwdriver to tighten Cam-bolt vertically until shoulder is flushed (on the same
level) with panel. Do not over-tighten or under-tighten.
Align the arrow of the Cam-lock to
the Cam-bolt head and insert the
Cam-lock.
Use a Flat Screwdriver or Phillips
Screwdriver to turn the Cam-lock
clockwise one half a turn so it locks
onto the head of the Cam-lock. Turn
only until it is snug. Over-tightening
could damage Cam-lock or/and
Cam-bolt.
03