Before You Start
ASSEMBLY PREPARATION
1.Remove all packaging materials, staples and packing straps
from the carton.
2.Refer to Parts List and Hardware List and ensure they are
complete before you start assembly.
3.Place all parts on a clean, flat and soft surface (e.g. carpet or rug)
to prevent parts from getting scratched.
SAFETY PRECAUTIONS
1.Keep all hardware parts out of reach of children.
2.Dispose plastic packaging material immediately to avoid any
risk of suffocation to children and animals.
TIPS FOR ASSEMBLY:
1.Allow ample room for assembly and in close proximity to where
product will be placed.
2.Assemble the product on a surface that does not scratch or
damage he exterior gloss and finish of the furniture.
3.Please check all of the parts and quantities are included before
assembly. Contact customer service for missing parts.
4.Identify all of the parts, hardware and quantities required for
each step.
5.During assembly, do not over-tighten any fittings as this may
cause damage.
6.Do not use power tools to assemble this product.
7.Always place the product on a flat surface.
8.Do not sit or stand on the partially assembled product; only use
the product for which it is intended.
9.Don't tighten screws completely at first, just in case parts were
assembled wrong and need disassembled. Tighten screws at last
when all parts are put together.
10.Please use the screws correctly, otherwise you might damage the
desk pane.
