Tribe JETBEAM2, Руководство пользователя

Страница: 11 / 48

9 JETBEAM2
3.5 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.6 DMX ADDRESS
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the Address and press the ENTER key.
• Press the arrow keys to select the desired value ( 001-512 ).
• Press the ENTER key to confirm the setting.
• Press the MENU button repeatedly to exit the menu and save changes.
3
ADVANCED
ð
Reset
ð
All
ð
YES/NO
Pan
Tilt
Color
Gobo
Prism
Adjust
ð
Pan Offset
ð
Value (000-255) for each function
Tilt Offset
Color Offset
Gobo Offset
Prism Offset
Factory Reload
ð
YES/NO
4
INFORMATION
ð
Fixture Time
Temperature
Fans Speed
Software Ver.
UID
5
STAND ALONE
ð
Play
ð
Master/Slave
ð
Master
Slave
Sequence ð Show 1
Show 2
Show 3
Show 4
Speed ð Value (00-100%)