TR 43
2
EN
SAFETY INFORMATION
EN
Failure to comply with the specified precautionary measures may cause serious injury to persons or damage to property. The installation and commissioning may only be
performed by suitably qualified persons, technicians or installers in compliance with safety regulations.
Damage due to improper installation and commissioning, defective connectors on cables or any other incorrect handling will void the warranty.
CAUTION: The safety requirements are according to EN 60728-11 and must be observed.
Disconnect mains power before working on electrical systems.
Any additional electrical wiring requirements should always be installed by a suitably qualified person(s).
Installation or service work should NEVER be undertaken during electrical / thunderstorms.
CAUTION
To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to
qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation
and servicing instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
The apparatus shall not be exposed to dripping or splashing, and that no objects filled with liquids, such as vases, shall be place on the apparatus.
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every
instrument. However, safety is your responsibility, too. This sheet lists important information that will help to assure your enjoyment and proper use of
the video product and accessory equipment. Please read them carefully before operation and using your video product
INSTALLATION
1.
Read and Follow Instructions: All the safety and operation instructions should be read before the video product is operated. Follow all
operating instructions.
2.
Retain Instructions: The safety and operating instructions should be retained for future reference.
3.
Heed all Warnings: Comply with all warnings on the video product and in the operating instructions.
4.
Polarization: Some video products are equipped with a polarized alternating -current line plug. This plug will fit into the power outlet, try
reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. To prevent electric shock, do not use this
polarized plug with an extension cord, receptacle, or other outlet unless the blades can be fully inserted without blade exposure. If you need an
extension cord, use a polarized cord.
5.
Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your video dealer or local power company. For video products intended to operate from
battery power, or other sources, refer to the operating instructions.
6.
Overloading: Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous, They may result in a shock or fire
hazard. Periodically examine the cord, and if its appearance indicated damage or deteriorated insulation, have it replaced by your service
technician.
7.
Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the video product.
Where the MAIN plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
8.
Ventilation: Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from
overheating. These openings must not the blocked or covered. The openings should never be blocked by placing the video product on a bed,
sofa, rug, or heat register. This video product should not be placed in a
Содержание TR-43
Страница 20: ...TR 43 20 EN...
