Triax TR 212, Руководство по эксплуатации

Страница: 37 / 48

37
Software Upgrade
USB Upgrade
The receiver software can be upgraded. The
software upgrade menu can be accessed through
Menu > Settings > Upgrade. This is shown below:
The USB upgrade is a fast and convenient way
to upgrade the system software, You simply
copy the upgrade file onto a USB memory stick,
and plug the USB device into the system USB
interface. You can then upgrade the software as
follows:
• Before a USB upgrade, you must prepare
the upgrade file. The file name is usually a
*.bin (not case sensitive), Otherwise the
system can not enter the upgrade mode.
• The size of the USB upgrade file must be
less than or equal to 4M bytes, if not it may
result in a failure to upgrade.
• USB upgrade:
- Enter the USB upgrade menu
press(menu -> setting -> upgrade ->
USB upgrade)
Enter the USB directory list page, as
shown below:
Select the upgrade file and press the “OK” key
to start the upgrade. Enter the upgrade page to
show information and prompt the user on the
upgrade process:
• The whole USB upgrade process will take
a couple of minutes.
• DO NOT switch off the power during the
upgrade process.
• When the upgrade has finished, the system
will automatically restart with the new
firmware.