2.2 Easy Installation
Ƈ
Scan
• After selecting all that is necessary, press the
RED
button to scan the
satellite list.
Pop up widow will bedisplayed.
• Select ON or OFF according to your
Network
.
• Select All or FTA
Search Type
.
• Select All, TV, or Radio
TV/Radio type
.
• Press the
OK
button and searching will start.
Note
•
After the Degree, Longitude and Latitude is entered accurately,
the DiSEqC Motor will automatically move to the satellite’s position.
2.2.5 Terrestrial - Channel Search
Ƈ
Manual Search
Manual search is more convenient to search a specific MUX.
This menu searches also channels broadcasted over a specific MUX
using its detected information.
• Press the
UP/DOWN
buttons to select the MUX No. you want to find,
and then press
OK
button to add or remove fron the search list.
• To start search, press the
GREEN
button.
• At the pop up window, select all channel or FTA channel search.
• Press the
BLUE
button to change the MUX priority. (Auto/High/Low).
• When searching is started, the name of channels searched will be
displayed on the screen.
• When searching is finished, the ”
Search finished
” message will be
displayed on the center of the screen.
• Press the
OK
button to save the channel list and watch the channel
searched.
2.2.6 USALS
Set Longitude and Latitude when you use USALS.
• Press the
UP/DOWN
buttons to select Longitude and Latitude.
• Press the
NUMERIC
buttons to set the angle of Longitude and
Latitude.
• Press the
OK
button to set the direction of Longitude and Latitude.
13
