- 19 -
CSE 2800
6.3 lnb p
ower
supply
ConneCtions
• Connect the DC cable
%
of a retrofitted input distributor to one of the con-
tacts
^
(12V/800 mA total).
%
^
6.4 rf
ConneCtions
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station using F terminals.
Note:
The F terminal at the rear panel are intended to use for RF input and RF output.
The following connection example shows a possible connection scheme.
• Connect the SAT IF cables coming from the LNBs to the relevant F terminals
(fig. 23,
4
).
4
6
4
5
3
2
1
7
Fig. 22
