- 9 -
CGT 660
3.1 r
etrofit ting
a
Ca
module
The COFDM-QAM module is equipped with a common interface for CA mod-
ules of various scrambling systems and service providers. Scrambled channels
can only be descrambled with a CA module suitable for the scrambling system
and the corresponding smart card. The smart card contains all the information
for authorisation, descrambling and subscription.
– Check with the distributor or manufacturer of the CA module to be used to
ensure that it is suitable for the reception of several channels.
– The module‘s hardware and software have been thoroughly prepared and
tested.
–
Any changes made by program vendors to the structures in the program
data might impair or even prevent this function.
– When working with the CA module, please read the corresponding operat-
ing manual from the respective provider.
• Insert the smart card
1
into the CA module
2
so that the chip
3
on the
smart card faces the thicker side (top) of the CA module.
• Push the CA module
2
without canting into the guide rails
4
of the com-
mon interface slot
5
according to the following picture and contact it to
the common interface.
5
2
3
4
1
