- 4 -
CGT 660
1
s
afety
regulations
• The standards EN/DIN EN 50083 resp. IEC/EN/DIN EN 60728 must be
observed.
• Do not perform installation and service work during thunderstorms.
• Assembly, installation and servicing should be carried out by authorised
electricians.
• Switch off the operating voltage of the system before beginning with assem
-
bly or service work.
• Avoid short circuits!
• Observe the relevant standards, regulations and guidelines on the installa
-
tion and operation of antenna systems.
• To ensure electromagnetic compatibility, make sure all connections are tight
and the covers are screwed on securely.
• No liability is accepted for damage caused by faulty connections or inap
-
propriate handling of the device.
Check the head-end station
CSE 2800
a
ccording to the safety instructions
listed in their assembly instruction.
Take precautions to prevent static discharge when working on the device!
Electronic devices should never be disposed of in the household rubbish. In
accordance with directive 2002/96/EC of the European Parliament and the
European Council from January 27, 2003 which addresses old electronic and
electrical devices, such devices must be disposed of at a designated collection
facility. At the end of its service life, please take your device to one of these
public collection facilities for proper disposal.
2
g
eneral
information
2.1 s
Cope
of
delivery
1 Head-end Digital Modulator CGT 660
1 HF connection cable
1 CD (assembly instructions)
1 Brief Assembly Instructions
