- 21 -
CGS-2 764 C
Inverting the user signal:
For exceptional cases and "older" digital cable receivers, the spectral position
of the user signal can be inverted "
NEG
". Factory default is "
POS
".
• Use
to place the cursor under "
POS
".
Bx 4A
!
6900 QAM 256
QAM–MODE
POS
• Use
to set the spectral position to "
NEG
".
• Press the button.
—> The "Substitute signal in the case of an incorrect input signal" –
"
FAILURE
" submenu is activated.
s
ubstitute
signal
in
the
Case
of
an
inCorreCt
input
signal
You use this menu to set whether a "
Single Carrier
" signal should be provid-
ed or the self-made tables "
Tables
" should transmitted furthermore whenever
an incorrect input signal occurs.
FAILURE
Bx 4A
Tables
• Use the
buttons to set the required output signal.
• Press the button.
—> Returning to "Output settings" main menu (page 17).
—> If necessary set further modulators.
• Press the button.
—> The "Input settings" – "
INPUT
" main menu is activated.
