- 11 -
CGS-2 764 C
3.3 C
onneCting
the
Qam
module
F
G
C
D
E
Fig. 4
• Connect SAT-IF inputs
C
(input "In A") and
D
(input "In B") on the QAM
module (fig. 4) to the preinstalled F terminals in the rear wall of the head-
end station via the cable inlets
F
using RF cables made on-site (length
approx. 80 cm) or if applicable connect each to one of the outputs of a
retrofitted SAT-IF input distributor.
• After programming, connect the modulator output
E
to one of the input
sockets
G
of a retrofitted output collector.
