Timer
- 22 -
- 22 -22
For leaving this menu please press
EXIT
. If the “Save?” popup appears, please select if you
want to store your modifications (
Yes
)
or keep the previous settings (
No
)
.
Confirm your choice
by pressing
OK
.
Timer
You can use the record timer functionality to programme a recording for a connected video
recorder. Totally 10 record timers can be activated.
Or you can use the sleep timer to specify a time at which the
receiver is to switch into standby mode.
Therefore please enter the
Main menu
by pressing
Menu
; then
select menu item
Timer
and confirm with
OK
.
Timer
–
record timer
Use
to select line
Record timer
in menu
Timer
and press
OK
.
The following menu appears:
Programming a record timer:
1. Select line
Timer index (1...10)
with
2.
There select timer place with ◄ ►
3. Select lines
Start at
,
Stop time
or
date of recording
with using
and confirm with
OK
4. Enter the required time or date by pressing
0
-
9
5. Confirm your input with using
OK
6. Select line
Station
with
and confirm with
OK
Select a channel with
or ◄ ► and confirm with
OK
.
7. Select line
Repetitions
with
and use ◄ ► to specify the number of
repetitions of
this record.
8. Select line
Activate timer
and activate the programmed record timer by pressing
OK
there (text
Activate timer
changes to
Deactivate timer
).
The receiver will switch on at the programmed time and signals a timer record by displaying
“
rEC.
“ in the 4 digit LED Display. If you want to abort a record, please enter the record timer
menu and deactivate the timer by pressing the
Deactivate
button.
Record timer
Timer-index (1…30)
Start at
Stop time
Date of recording
Station
Repetitions
20:07
1 (inaktiv)
00:00 Uhr
00:00 Uhr
01.07.09
1 Das Erste
nothing
Activate
Timer
Record timer
Sleep timer
Information
- 23 -
- 23 -23
If you push one of the buttons
or ◄►, following menu appears:
Choose „Yes“ to stop the record or „No“ to continue the record.
Hint:
Please make sure that the local time of the receiver is set correctly and the video
recorder is programmed, too.
Information
Enter the main menu, there use
to select line
Information
and press
OK
.
In the upper section of the menu the channel parameters of the activated channel are
displayed.
In the lower section of the menu the signal qualities are displayed.
-
C/N
:
The further the bar turns right and the higher the dB value, the better
the signal quality.
-
Level
:
The further the bar turns right the better the reception.
Hint:
The power of the signal depends on the antenna set up and also on the currently activated
channel. Please remember this if you want adjust your antenna by controlling the signal
power.
After pressing the ◄ ► or the
yellow
button two further charts with channel, software and
hardware information are displayed. With
you can change the channel.
Use
EXIT
to leave this menu.
Teletext
Press the
TEXT
button to display the videotext of the current channel. The first site to be seen
is site number “100“.
In order to view a specific page, use the buttons
0-9
to enter the three-digit page number.
Your
input is displayed in the left corner on the screen. When the site number is input completely
the receiver starts to search the corresponding site. Because the video text sites are sent site
by site it may take some seconds until the required site is found. Enter “100” at any time to
return to the home page of the videotext.
You may use
to quickly page through the complete videotext section of a particular TV
channel.
If you press the
TEXT
button again you can switch into the mixed mode (background
transparent). Use the
TEXT
button to return to the normal mode.
For leaving the video text please press
EXIT
.
Record active. Stop?
Yes No
Содержание C-HD207CG
Страница 7: ...Remote control 7 Remote control...
