Triax 492090, Руководство пользователя

Страница: 10 / 60

10
Input
Each input module has a LED on the front to signal whether the module is
locked or not to the frequency that it is set to receive at.
You can remove an input module from a module slot without using any tools,
just use your fingers.
You install an input module by sliding the module into a module slot in the
upper section of the headend unit and click the module into place.
The module has not been configured yet.
Green - flashing
No errors and the tuner is locked to the frequency. Green
Error and the tuner is not locked to the frequency.
Red
Power has not been switched on.
No colour
When you update the software of a module the status LED provides you with
information about the updating process.