manualshive.com logo in svg

TRIATEK HMS-1655L, Руководство по установке

Поделиться
Скачать
TRIATEK HMS-1655L Скачать руководство пользователя страница 33

• 

Use a clean cloth that is dry, or lightly dampened with a mild cleaner or Ethanol. Be sure the cloth is only lightly dampened, not wet. Never 

apply cleaner directly to touch panel surface; if cleaner is spilled onto touch panel, soak it up immediately with absorbent cloth.  

• 

Cleaner must be neither acid nor alkali (neutral pH).   

• 

Wipe the surface gently; if there is a directional surface texture, wipe in the same direction as the texture.

• 

Never use acidic or alkaline cleaners, or organic chemicals such as: paint thinner, acetone, tolulene, xylene, propyl or isopropyl alcohol, or 

kerosene.

CLEANING THE DISPLAY

- 

33

 -

Touching the current fume 

hood name text brings up an 

alphanumeric keyboard to 

quickly change the name of the 

monitored fume hood.

Touching anywhere else on the 

screen enters the Main Setup 

Menu if no password is stored. 

Otherwise, a password must 

be entered before the Main 

Setup Menu can be accessed.

Touching the face velocity 

reading brings up engineering 

units selection popup to quickly 

change from English to metric 

units

Hot-Spot Features of HMS-1655L Touchscreen Display

Triatek reserves the right to change product specifications without notice.

HMS-1655L

Triatek reserves the right to change product specifications without notice.

Cleaning the HMS-1655L Display

Triatek reserves the right to change product specifications without notice.

Touch Emergency Purge 

to send exhaust damper to 

maximum open position in the 

event of an emergency.

Touch to silence alarm. 

Automatically reverts back 

to audible mode when alarm 

condition is removed.

Touching the Status Line 

brings a popup to quickly 

change operating mode. 

CLEANING THE DISPLAY

Содержание HMS-1655L







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды