Triangulum Astro TEPP, Руководство пользователя

Страница: 11 / 12

TEPP User Manual
Triangulum Astro Kft.
11
6. Troubleshooting
Problem observed Possible solution, root case
Remote controller doesn’t work  You’re out of the range, get closer

Battery is down, recharge it

Strong WiFi router can be found close to
the platform
Target object always leaves the
frame

Check the set latitude

Check the pole direction

Check the power supply of the controller
Guiding has a significant RA error

Check the tightness of the belt

Too windy weather
Guiding has a significant DC error

Check the position of the center of gravity
of the telescope, maybe it’s too close to the
DC axis

Too windy weather
Guider gives „Calibration error” 
Doublecheck the stable balance of the Alt-
AZ axles

Try to select another autoguider speed on
the TEPP controller unit

Too windy weather
Blurry or striped pictures

Check the balance and proper fixing of Alt-
AZ axles

Try to set another integration time for
guiding

Too windy weather
Guider shows big deviation for the
RA-DEC perpendiculars

Try to take photos in another time, when
the target is closer to the meridian
One of the 12V outputs is not
working

Overloaded output: remove the load, and
wait 10-15 minutes to recover the internal
fuse

Try to connect your load to another output
connector
TEPP is not initialize (continous
short beeping)

Check the cables of the limit switches

Check the connectors and cables of the
TEPP controller unit
TEPP jumps or slides sometimes

Overweighted platform

RA belt is too loose
In peripheral positions the telescope
willing to fall off

Check the position of the center of gravity
of the telescope

Check the center mounting screw of your
telescope’s base

Fix the base to the TEPP using cable ties
DEC movement lags, or it has
clicking noise

Check the greasing of the DEC axis