Triangle Engineering THETIS, Руководство пользователя и гарантия

Страница: 23 / 28

23
EN
To make activate this function, connect the subwoofer via the «Line-IN” input.
Using the A/V amplifier’s filtering
You can use your A/V amplifier (if it allows) to filter the bass frequencies of the subwoofer. Position
the volume button at 3/4. Make the settings on your A/V amplifier (see the owner’s manual of your
equipment at the section setting subwoofer mode and crossover frequency).
Use the LFE input (yellow RCA input) on your subwoofer. In this way, the signal no longer passes
through the subwoofer’s internal filter, but directly to the amplifier.
Using of remote control
With the remote control, you can turn on or turn off the subwoofer and control volume. The
subwoofer is equipped with a LED power meter, and it is possible to adjust the volume in 9 different
steps. When you are using remote control, you must aim at the receiver placed on the front panel
of subwoofer.
CAUTION
Never open the subwoofer due to risk of electrical shock.
Check well that your power supply voltage corresponds to the one on the product (230V or
120V) A wrong voltage can break the product.
ON / OFF
VOLUME