8
Mode button
Under main interface, press this button to check unit status
and
adjust button
Turn pages up and down to check, modify parameters.
Combining with
to query and change parameters.
Under unit ON status, press
and
to set temperature in current mode.
Timer button
Press this button for 10 seconds to set clock.
Press this button to enter Timer ON/OFF setting mode, combing with
and
buttons to
set 2 groups of Timer ON/OFF.
Controller operations
Parameter query and settings
User parameter query and settings (available when unit ON or OFF).
On main interface screen, press
for 3 seconds to enter user parameter query interface, press
and
buttons to check each parameter.
On user parameter query interface, press
to enter parameter setting interface, press
and
buttons to modify parameter value, press
again to go back to parameter query status.
Under user parameter query or setting interface, if buttons are not pressed within 30 seconds, user
parameter query or setting interface will automatically exit and return to main operation interface.
can be pressed to go back to main operation interface.
Clock settings
Under main operation interface screen, press
for 5 seconds to enter clock setting interface.
On clock setting interface screen, press
on time, the “hour” digit is flashing, then press
and
buttons to modify value for “hour.”
After setting “hour” digit, press
again, the “minute” digit is flashing, then press
and
buttons to modify value for “minute.”
After setting “minute” digit, press
again to confirm clock settings and go back to main operation
interface.
Under clock setting interface, if buttons are not pressed within 30 seconds, display will automatically
confirm current clock settings and go back to main operation interface.
Under clock setting interface, press
to confirm clock settings and go back to main operation
interface.
