1 General
Dear user!
This manual describes the TSD80/TSD130 series of Triamec digital servo drives. In order to be able to
start operation of your Triamec drive quickly without problems, we suggest you to read this manual be-
fore carrying out any operation with the Triamec hardware.
Technical data, dimensional drawings and more background information can be found at
1.1 Target group
This manual addresses persons with the following qualifications:
Transport :
only persons which know how to handle electrostatically sensitive components.
Installation : only electrically qualified personnel.
Setup :
only persons with electrical engineering and drive technology qualifications. The quali-
fied personnel must know and observe the following standards:
IEC 60364 and IEC 60664 national accident prevention regulations.
1.2 Standards used
Standard
Content
EN ISO 13849-1:2008 Safety of machinery: Safety-related parts of control systems
IEC 60204
Safety of Machinery: Electrical equipment of machinery
IEC 60364
Low-voltage electrical installations
EN 60529:1991
Protection categories by housing (IP Code)
IEC 60664-1:2007
Insulation coordination for equipment within low-voltage systems
IEC 60721-3-2:1997
IEC 60721-3-3:2002
Classification of environmental conditions
IEC 61326-3-1:2008
Immunity Requirements for safety-related systems
IEC 61508:2010
Functional safety of electrical/ electronic/ programmable electronic safety-related systems
IEC 61800
EN 61800-1:1999
EN 61800-3:2012
EN 61800-5-1:2008
EN 61800-5-2:2008
Adjustable speed electrical power drive systems
General Requirements
EMC requirements and specific test methods
Safety requirements – Electrical, thermal and energy
Functional Safety
Table 1: Standards.
HWTSD80-TSD130_4_HardwareManual_EP006
2022-01-27
4/49
