4.6 Maintenance, Cleaning and Repair
The devices do not require any maintenance, opening the devices invalidates warranty.
Cleaning:
If the casing is dirty, clean with Isopropanol or similar. Do not immerse or spray. Dirt inside the unit
must be cleaned by the manufacturer.
Repair:
Repair of the servo drive must be done by the manufacturer. Opening the devices means loss of the
guarantee. Disassemble the equipment as described in chapter 4.5 and send it in the original packaging
to Triamec Motion AG.
4.7 Disposal
We take old devices and accessories back for professional disposal (WEEE-2002/96/EC-Guidelines).
Transport costs are the responsibility of the sender. Disassemble the equipment as described in chapter
4.5 and send it to Triamec Motion AG.
HWTSD80-TSD130_4_HardwareManual_EP006
2022-01-27
13/49
