How to use TAM System Explorer
Scope
3.3.8 Loading Templates
For each axis in the
Topology Tree
, the scope menu offers a
Load for <axis name>
entry. When ex-
panded, a number of templates are available as shown in Figure 15. Each template will set up the scope
for a specific use with respect to the selected axis.
Several templates may be loaded in sequence for different axes. Use the
Clear Scope
menu to reset the
scope to an initial state.
The first sub-menu entry
From Configuration...,
allows to treat any previously saved scope configura-
tion as a template for the currently selected axis. This is manly used for configurations where all plots
refer to the same axis.
3.3.9 Analysis
The scope incorporates the most frequently used analysis functions.
ServoDrive-SetupGuide_EP018
2022-08-25
19
/
83
Figure 15: The Scope Menu
The first section of the scope menu is related to zooming and panning. The next
section is used to load and save plot data followed by an analysis section and a
section to reset the scope. The last section handles the configuration of the
scope.
