Triad
CR
Surround 2
& OnWall Bracket - Quick Start Guide
2014.
11.4
TriadSpeakers.com • Sales: 1800-666-6316
CR
Surround
2 Speaker
- Product Info & Warranty -
Page 1
Surround
2 Speaker
Note: Correct
orientation
places tweeter &
horn beneath the
woofer.
Speaker Parts
Endc
ap
Top Bracket
w 3/8-20-2”
hex bolt
Bottom
Bracket
w 3/8-20-2”
hex bolt
Enclosure
Endcap
Grills
Included OnWall Bracket Parts
A
(1) Wall Bracket
B
(7) Wall Anchors
C
(7) #10 Oval
Philips Screws
D
(2) ¼-20 x 1” Allen
screws with (2) 1/4”
lock washers & (2)
1/4” flat washers
E
(1) 3/16” Allen
Wrench
F
(2) 3/8” x 2-1/2”
eyebolts
Screwgun with
Philips Bit
Additional Tools Needed
9/16” 14 mm
Socket wrench
with 9/16 inch
(14mm) socket
Crew of 2
Ladder
Level
3/8” (9.5mm)
drill bit for
anchors
Pencil
Specifications:
Sensitivity: 91dB @ 1 m 2.83 volts
Impedance: 4 ohm nom
Power Handling: 200W
Rec Amp Power: 50W-400W
Max output: 114dB
F3 (-3dB): 50Hz
Dims: 22-1/16” w x 27.375” h x 9” d
(560mm x 695mm x 222mm)
Weight: 55 lbs (25 kg)
North American Limited Warranty
Triad speakers are warranted to be free from
defects in manufacturing and workmanship (10)
years when operated under normal conditions.
Should any such defects occur within the
warranty period call Triad Service at
1-503-256-2600 for an RA number. Return
product in intact factory packaging with RA
number clearly visible on outside of box and
proof & date of purchase inside to:
Triad Speakers Inc., 15835 NE Cameron Blvd.,
Portland, Oregon 97230 USA
Triad is not responsible for any shipping
damage coming in to Triad. If you do not have
intact factory packaging, contact your dealer or
Triad Service to purchase.
CR Surround 2
is a high output passive
loudspeaker designed for high performance
surround channel and certain house music
applications. A new type of surround
speaker, it combines the best characteristics
of conventional monopole, bipole & dipole
surround designs. Its ultra high output
folded ribbon tweeter and proprietary Triad-
designed wave guide
enhance its horizontal
& vertical dispersion, creating a broad,
smooth power response in a tailored hemi
-
spherical polar pattern t
hat
fill
s
rooms more
evenly than bipole & dipole surround de
-
signs, without their characteristic frequency
response errors and volume variations.
Timbre matched with our CR LCR 2,
Surround 2 delivers smooth transitions,
3-dimensional surround soundstaging, and
total immersion.
Surround 2’s room filling full-range
sound also works beautifully in house
music rooms that require high quality
sound evenly & broadly distributed
throughout a room.
CR Surround 2 Applications for Home Theaters, Screening Rooms, and Gaming Rooms -
CR Surround 2 is ideal for side & back
surround channels and height & width effects channels. As side and back surround channels, they should be positioned with the speaker bottom a
minimum of 2 feet (61cm) above ear level and no closer than 1 foot (30.5cm) from the speaker top to the ceiling
(Except for Atmos rooms. Please call)
.
They direct energy down to the listeners for enhanced focus and up to the ceiling for enhanced envelopment.
Standard OnWall Brackets give C
R
Surround 2 speakers up to 10 degrees downward tilt and 12 degrees lateral swivel adjustment. Minimum (no tilt
or swivel) mounting depth is 9-1/2 inches (241mm). At max tilt and swivel, depth is 14-1/2 inches (368mm). When mounting behind acoustically
transparent fabric walls, add min ¼” (6.5mm) clearance. Surround 2 can be flown or hung using the provided I bolts.
Max
Tilt
Horizontal Dispersion
Side Views
Minimum Depth: No Tilt; No Swivel.
No Tilt; Max 12 degree Swivel.
10deg
Max 10 degree Tilt; No Swivel.
Max Depth : Max 10 degree Tilt;
Max 12 degree Swivel.
Mounting Depths, Tilt, & Swivel
Top Views
Rec Crossover: 80 Hz
