TRI tool SEVERMASTER 576AC, Руководство по эксплуатации

Страница: 9 / 40

Model 576AC SEVERMASTER ™
92-1924 Orig. 201016 7
3. GENERAL DESCRIPTION
The Model 576AC SEVERMASTER™severs 2.00” to 6.63” (50.8mm to 168.3mm)
diameter tubes and thin wall pipe within the size range.
This machine enhances productivity by incorporation of an Auto-Cycle Tool Module
and Quick Lock Collet Closure.
The Auto-Cycle Tool Module incorporates a cam cycle tool bit feed mechanism which
automatically returns the tool bit to the home position ready to start the next cut.
The tool module also allows setting the start and finish cut position to minimize the
cycle time.
The feed increment per revolution is adjustable to match the cutting relative to the
material.
A variable speed motor provides cutting speed control for tool bit life and ID burr
condition.
The Quick Lock Collet Closure mechanism actuates the collet with a single lever
stroke and provides for simple collet changes.
Tool bit options are available to minimize the burr on either the mounting side or the
drop-off side of the sever line and in different edge widths to match the tube wall
thicknesses.
The Model 576AC also incorporates mounting features to allow use of an SQM-2AC
Tube Squaring Module for optimum burr free ends.
The Model 576AC SEVERMASTER™ System, consists of the mainframe with the
Quick Lock Collet Closure, Auto-Cycle Tool Module with adjustable depth of feed
from .001” to .005” (.02mm to .13mm) per revolution, drive motor, wrench kit and
operator’s manual.