manualshive.com logo in svg

TRI tool 604SB, Руководство пользователя, Страница: 49 / 76

Поделиться
Скачать
TRI tool 604SB Скачать руководство пользователя страница 49

Model 604SB thru 612SB Clamshells

92-1197 Rev. 200519

47

13.  ACCESSORIES

The following accessories for the Model 600SB Clamshells are available  

from Tri Tool Inc.

•  Portable Air Filter (P/N 75-0115)

 

A Filter/Regulator/Lubricator (FRL) is required to protect the warranty on all Tri 

Tool INC air driven tools.

•  Counterboring Module Kit-CBM-2 (P/N 05-0116)
•  Counterboring Module Kit, CBM-3 (P/N 05-0405)
• 

Tool Bits (Refer to section on Tool Bits)

• 

Tool Blocks (Refer to section on Tool Blocks)

• 

Clamping Pad Sets (Refer to section on Clamping Pads)

•  Air Motor, 1.5 HP (P/N 57-0072
•  Air Motor, 2.25 HP (P/N 57-0162)
•  Air Motor, 3.0 HP (P/N 57-0163)

 

A Heavy Duty Motor is recommended for use when beveling carbon steel pipe 

with a wall thickness greater than .75” (19.1mm) or when beveling stainless 

steel pipe with a wall thickness greater than .50” (12.7mm)

 

(See specifications for motor selection)

•  Electric Drive Kit, 110V (Milwaukee) (P/N 05- 0123)
•  HD, Electric Drive Kit, 115V (Unitec) (P/N 05-0434)
•  HD, Electric Drive Kit, 230V (Unitec) (P/N 05-0414)
•  Hydraulic Drive Kit (P/N 05-0358)
•  Reverse Drive Housing Kit (P/N 05-0804)
•  Repair Kit (P/N 05-0135)

 

(For the Standard Tool Module (P/N 08-0037))

•  Repair Kit (P/N 05-0136)

 

(For the Extended Tool Module (P/N 08-0040))

• 

Lathe Stand Kits: (Note Lathe Stand Kits work with Standard and Extended 

Tool Blocks only) 

604SB (P/N 60-0044) 

606SB (P/N 60-0045)

 

608SB (P/N 60-0046) 

610SB (P/N 60-0047)

 

612SB (P/N 60-0048)

•  HD Tool Module Kit (P/N 05-0440)
•  Sever Tool Holder Kit (Iscar) (P/N 05-1357)
•  An ASO (Automatic Shut Off) (Special order only)

Содержание 604SB













































































Отзывы:

Нет отзывов