background image

TRI TOOL INC.

92-0116 Rev. 210906

4

TRI TOOL INC. Warranty

LIMITED WARRANTY: All products manufactured by Seller are warranted to be free from 

defects in materials and workmanship under normal use. The period of this warranty shall 

be three years from the date of shipment for all products, except for welding and Non-

Standard Products which shall be one year from the date of shipment. The Buyer shall 

bear all shipping, packing and insurance costs and all other costs to and from a designated 

repair service center. All return goods must be authorized in advance and communicated 

upon issuance of a Return Material Authorization (RMA) by Seller. The product will be 

returned to the Seller accompanied by a RMA number and associated paperwork, freight 

prepaid and billed to the Buyer. This warranty is not transferable and will not apply to tool 

bits or other consumables, or to any Goods to have been (i) mishandled, misused, abused 

or damaged by Buyer or any third party; (ii) altered without the express permission in writing 

by Seller, (iii) repaired by a party other than Seller without Seller’s prior written approval; 

or (iv) improperly stored, installed, operated, or maintained in a manner inconsistent with 

Seller’s instructions. This warranty does not apply to defects attributed to (i) normal wear 

and tear or (ii) failure to comply with Seller’s safety warnings.
No warranty for any parts or other supplies provided to seller by buyer, whether or not they 

are incorporated into goods. Goods supplied by seller which are designed or manufactured 

by a third party are subject strictly to the third party’s warranty for those goods. Seller 

makes no warranty and disclaims all statutory or implied warranties for these goods, 

including the implied warranties of merchantability, freedom from patent infringement and 

fitness for a particular purpose.
Neither this warranty nor any other warranty, expressed or implied, including implied 

warranties of mechanical ability, fitness for a particular use, or merchantability, shall extend 

beyond the warranty period. No responsibility is assumed for any incidental or consequential 

damages. Some states do not allow limitations on how long an implied warranty lasts and 

some states do not allow the exclusion or limitations incidental or consequential damages, 

so the above limitation of exclusion does not apply to all Buyers. This warranty gives the 

Buyer specific legal rights. Other rights vary from state to state.

Warranty Claims and Remedies

Buyer must promptly notify Seller in writing during the applicable warranty period, of 

any defective Goods covered by Seller’s warranties under the Limited Warranty section 

herein, and no later than fifteen (15) calendar days after discovery of the defect. Seller 

has no obligation to honor any warranty claim made after the expiration of the warranty 

period. However, despite the expiration of the warranty period, Seller, at its reasonable 

discretion, may accept warranty claims submitted up to fifteen (15) calendar days after 

the expiration of the warranty period provided that Buyer provides Seller with credible and 

persuasive documentary evidence that the defect was discovered during the warranty 

period. No warranty claims submitted after this fifteen (15) day calendar period will be 

considered by Seller.

Содержание 550 Series

















































Отзывы: