10
High Speed Mini PTZ Camera
11
High Speed Mini PTZ Camera
4. MAIN SETUP MENU
4. 1 Initialize
4. 2 Motion Menu
When the device is powered on, you can check the address,
version, protocol and video setting values.
ACH=CBA9BI
The preset function is that the camera memorizes positions
of the pan/tilt and zoom. This function is a representative
function of the speed dome which can find memorized
preset positions just by selecting the preset number.
MAIN MENU
MOTION
DOME
CAMERA
CLEAR
PTZ RESET
EXIT
< NEAR / RIGHT MOTION >
1) Set preset.
SAVE CLR BACK EXIT
PRESET MENU
PRESET NO
LABEL
POSIRION
FOCUS
: 001 UNDEFINE
: PRESET 001
: 019.9, 005.4
: AUTO
< NEAR / RIGHT PRESET NO >
- Set PRESET Number
The mounting has to be installed onto a firm and stable location where all the parts may be completely
secured. The installation needs to be performed by a trained and experienced professional.
PRESET SELECT 1
< SEL NEAR/MOVE JOYSTICK >
P 0 0 1
P 0 0 7
0 1 3
0 1 9
0 2 5
0 3 1
0 3 7
0 4 3
0 4 9
P 0 0 2
P 0 0 8
0 1 4
0 2 0
0 2 6
0 3 2
0 3 8
0 4 4
0 5 0
P 0 0 3
0 0 9
0 1 5
0 2 1
0 2 7
0 3 3
0 3 9
0 4 5
0 5 1
P 0 0 4
0 1 0
0 1 6
0 2 2
0 2 8
0 3 4
0 4 0
0 4 6
0 5 2
P 0 0 5
0 1 1
0 1 7
0 2 3
0 2 9
0 3 5
0 4 1
0 4 7
0 5 3
P 0 0 6
0 1 2
0 1 8
0 2 4
0 3 0
0 3 6
0 4 2
0 4 8
0 5 4
Preset No. : Max. 255 positions can be stored and the each
position can be assigned as a defined Preset No.
Label : Each Preset can have its own label name.
Position : It displays the coordinates to position the assigned
Preset.
Focus : It enables to set the camera focus for each Preset
position.
NEAR
NEAR
Press key.
Select number by using joystick and press key.
1
2
3
5
4
3. 6 Outdoor (Wall Bracket)
1. Connect the cable with the connector of the base.
1. Align with the “ ” mark on the PTZ body and fix
the screw.
1. Attach the rubber adapter on the adapter and fix it
with wall bracket by using M4x10 screws.
1. Attached the rubber on the adapter wall and fix it
on the wall by using #8x38 screws.
2. Pull out the main cable and cover the hole by using
‘bolt mount B type’.
1. Attached the rubber on the bracket wall and fix it
with adapter wall by using security M5x20 screws.
2. Pull out the main cable through the bracket hole.
INITIALIZE
ADDRESS
VERSION
VIDEO
PROTOCOL
BAUDRATE
>>PAN OFFSET . . . . . . . PASS
>>TILT OFFSET . . . . . . . PASS
>>CAMERA . . . . . . . . . . . PASS
: 001
: 1.05
: NTSC EMC EM123SN
: PELCO P
: 2400, N, 1
C : 1.06
NORMAL SETTING WAIT...
